Aller au contenu principal
    • Shut down your computer. Disconnect all power sources before opening the computer cover or panels.

    • Remove the hinge cover and keyboard.

  1. Remove the coin-cell battery connector from the connector on the system board.
    • Remove the coin-cell battery connector from the connector on the system board.

    • Being careful not to break the plastic, slightly raise the corner of the plastic mylar above the battery.

    • While holding the mylar, grasp the battery and pull out of the battery compartment.

    • Read the conclusion below.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Hezekiah Brown

Membre depuis le 11/02/2021

5 196 Réputation

50 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

37 membres

2 013 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 5

Total : 15