Menu 

Vos paramètres

Dell Latitude D620 Keyboard Replacement

Rédigé par : Miguel Wong (et 8 autres contributeurs)
  • Commentaires : 1
  • Favoris : 7
  • Réparations terminées : 8

Difficulté

Facile

Étapes

7

Temps nécessaire

5 minutes

Sections

1

Drapeaux

0

Introduction

Guide to removing the keyboard from the D620.

Outils

Acheter ces outils

Pièces

Aucune pièce spécifiée.

  1. Power down the laptop and remove the battery.

    • Power down the laptop and remove the battery.

    • Open the laptop cover all of the way.

    Traduire

  2. Locate the notch under the cover at the top of the keyboard Using the spudger as a lever, lift the plastic covering Carefully remove the rest of the covering from right to left

    • Locate the notch under the cover at the top of the keyboard

    • Using the spudger as a lever, lift the plastic covering

    • Carefully remove the rest of the covering from right to left

    Traduire

  3. Unscrew the top portion of the keyboard using a #00 screwdriver

    • Unscrew the top portion of the keyboard using a #00 screwdriver

    Traduire

  5. Hold keyboard from the top and gently pull towards the LCD screen to remove the keyboard from the case

    • Hold keyboard from the top and gently pull towards the LCD screen to remove the keyboard from the case

    • Don't pull on the keyboard too forcefully because it is attached to the motherboard with a short, thin ribbon cable

    Traduire

  6. Once keyboard is out of the case, lay it face-down on the track pad Once keyboard is out of the case, lay it face-down on the track pad

    • Once keyboard is out of the case, lay it face-down on the track pad

    Traduire

  7. Using a small spudger, pull back on the black bar to release the blue lever Using a small spudger, pull back on the black bar to release the blue lever

    • Using a small spudger, pull back on the black bar to release the blue lever

    Traduire

  8. Pull up on the metal bar connected to the socket to detach the ribbon cable

    • Pull up on the metal bar connected to the socket to detach the ribbon cable

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autre(s) ont terminé cette réparation.

Auteur

avec 8 autres contributeurs

Miguel Wong

Membre depuis le 15/04/2010

470 Réputation

3 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

Cal Poly, Team 24-35, Regan Spring 2010 Membre de l'équipe Cal Poly, Team 24-35, Regan Spring 2010

CPSU-REGAN-S10S24G35

4 membres

4 tutoriels rédigés

Un commentaire

Ajouter un commentaire

Check out this keyboard at a great price on bcdelectrostore.com

http://www.bcdelectrostore.com/magento/l...

bob harris - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 20

Total : 15,748