Aller au contenu principal

Introduction

The bottom plastic cover is held on by 10 JIS #0 screws with a head size of 3.93 mm and a length of 8.46 mm.

Pièces

Aucune pièce spécifiée.

  1. With the laptop closed and the bottom side facing up, slide the two battery latches towards the sides of the laptop. When the latches are unlocked, a small logo resembling an open padlock will become visible.
    • With the laptop closed and the bottom side facing up, slide the two battery latches towards the sides of the laptop.

    • When the latches are unlocked, a small logo resembling an open padlock will become visible.

  2. Grasp the battery from the top and pull upward. Grasp the battery from the top and pull upward.
    • Grasp the battery from the top and pull upward.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Remove the ten 8.6 mm JIS #0 screws. Remove the ten 8.6 mm JIS #0 screws.
    • Remove the ten 8.6 mm JIS #0 screws.

  5. Place fingers underneath cover and pull off the cover.
    • Place fingers underneath cover and pull off the cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alec Weiss

Membre depuis le 05/11/2018

752 Réputation

8 tutoriels rédigés

Équipe

IUPUI, Team S2-G2, Baechle Fall 2018 Membre de l'équipe IUPUI, Team S2-G2, Baechle Fall 2018

IUPUI-BAECHLE-F18S2G2

3 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 4

Total : 105