Outils

Aucun outil requis.

Pièces

Aucune pièce nécessaire.

  1. Lay the Dell Optiplex GX260 down on a clean flat surface with the rear towards you.
    • Lay the Dell Optiplex GX260 down on a clean flat surface with the rear towards you.

    • Push the oval shaped buttons located on the top and bottom of the PC simultaneously and lift the case straight up.

    • Note: Some force may be required to push in the oval buttons open the PC case.

  2. Identify the optical drive in the case.
    • Identify the optical drive in the case.

    • Remove the analog audio cable from the optical drive.

    • Remove the IDE cable form the optical drive by pulling straight up on the orange plastic tab..

    • Remove the power cable from the optical drive.

    • Push the two green tabs toward each other to release the optical drive and lift it out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autre(s) ont terminé cette réparation.

Kevin Schapansky

Membre depuis le 05/10/2010

1 187 Réputation

9 tutoriels rédigés

Équipe

Cal Poly, Team 4-48, Amido Fall 2010 Membre de l'équipe Cal Poly, Team 4-48, Amido Fall 2010

CPSU-AMIDO-F10S4G48

4 membres

18 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 13

30 derniers jours : 59

Total : 8,038