Pièces

Aucune pièce nécessaire.

Power down your PC and remove the power cord from the back.
  • Power down your PC and remove the power cord from the back.

Ajouter un commentaire

Press and hold the power button for about 10 seconds, then release.
  • Press and hold the power button for about 10 seconds, then release.

    • This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.

Ajouter un commentaire

  • With the computer standing upright, firmly pull on the tab at the back of the computer.

  • When the side panel pops free, gently pull the panel away from the computer.

  • If you have trouble freeing the side panel from the case, you may need to pull the tab a bit harder.

Ajouter un commentaire

  • Remove the SATA power and data cables.

  • SATA Power

  • SATA Data

Ajouter un commentaire

  • Unplug the power and data cables.

Ajouter un commentaire

  • Unplug the fan.

Ajouter un commentaire

  • Remove the two Phillips #2 screws.

Ajouter un commentaire

  • Pull the heat sink up.

Ajouter un commentaire

  • Pull the two tabs and pull it out.

  • This needs a lot of force to take it off.

Ajouter un commentaire

  • Remove the one Phillips #2.

  • Remove the Data cable.

  • Taking this cable off will brake some of the plastic thats locking it in. But you can still plug the cable back in.

Ajouter un commentaire

  • Remove the one Phillips #2 screw.

  • Now you can replace it with a new one.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Padraic Hoselton

Membre depuis le 22/08/2017

2 773 Réputation

14 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

277 membres

730 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 17

Total : 201