Aller au contenu principal

Introduction

Replace the Dead Battery on the Motherboard

Pièces

Aucune pièce spécifiée.

  1. Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

  2. Lay the computer on its side; you will see a blue knob. Turn this knob 90 deg clockwise.
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

  3. Slide the panel case forward about 1/2 inch while knob is turned. Lift panel case off computer.
    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

  4. Unplug the blue cable that connects the hard drive to the motherboard. Unplug the blue cable that connects the hard drive to the motherboard.
    • Unplug the blue cable that connects the hard drive to the motherboard.

  5. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  6. Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view). Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view).
    • Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view).

  7. Squeeze the release tabs on either side of the hard drive.
    • Squeeze the release tabs on either side of the hard drive.

  8. Slide the Hard Drive out while squeezing the tabs. Slide the Hard Drive out while squeezing the tabs.
    • Slide the Hard Drive out while squeezing the tabs.

  9. Under the hard drive, there is a circular, silver battery connected to the motherboard.
    • Under the hard drive, there is a circular, silver battery connected to the motherboard.

    • Use a spudger to gently pry the battery from the motherboard.

  10. Lift the battery out of the motherboard.
    • Lift the battery out of the motherboard.

  11. Upon replacement, simply push the battery into the motherboard. Upon replacement, simply push the battery into the motherboard. Upon replacement, simply push the battery into the motherboard.
    • Upon replacement, simply push the battery into the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

9 autre(s) ont terminé cette réparation.

Tom

Membre depuis le 04/10/2010

799 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 22-4, Maness Fall 2010 Membre de l'équipe Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 membres

13 tutoriels rédigés

that particular battery holder looked hard to get out- no pop out lever, thought i’d break it gouging it out!

neverts “itchytastyurr” ennud - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 10

Total : 11,032