Aller au contenu principal

Introduction

Prerequisite Only

  1. Unplug the blue cable that connects the hard drive to the motherboard. Unplug the blue cable that connects the hard drive to the motherboard.
    • Unplug the blue cable that connects the hard drive to the motherboard.

  2. Unplug the power supply, distinguished by its red and yellow wires.
    • Unplug the power supply, distinguished by its red and yellow wires.

  3. Squeeze the release tabs on either side of the hard drive.
    • Squeeze the release tabs on either side of the hard drive.

    • Then slide the hard drive out of the computer while squeezing the tabs.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Tom

Membre depuis le 04/10/2010

829 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 22-4, Maness Fall 2010 Membre de l'équipe Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 membres

26 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 3,646