Pièces

Aucune pièce nécessaire.

Turn the system badge flap over (1) and then remove the ten M2x3 screws that secure the base cover to the computer (2).
  • Turn the system badge flap over (1) and then remove the ten M2x3 screws that secure the base cover to the computer (2).

    • Pry the edges of the base cover and lift it to remove it from the computer.

    • NOTE: Use a Torx #5 screwdriver for the base screws and a Philips screwdriver for the two M2x8 screws inside the badge flap.

Ajouter un commentaire

Disconnect the battery cable from the system board [1].
  • Disconnect the battery cable from the system board [1].

  • Remove the seven M2x4 screws that secure the battery to the computer [2].

  • Lift the battery off the computer [3].

  • Do not apply pressure to the surface of the battery

  • Do not bend

  • Do not use tools of any kind to pry on or against the battery

  • If a battery cannot be removed within the constraints above, please contact Dell technical support

Ajouter un commentaire

  • Remove the four M2x4 screws securing the hard-drive bracket to the computer [1].

  • Lift the hard-drive cage [2] off the hard drive assembly [3].

Ajouter un commentaire

  • Disconnect the hard-drive cable from the system board [1].

  • Lift the hard drive off the palm rest assembly [2].

Ajouter un commentaire

  • Disconnect the hard drive interposer from the hard drive assembly and then remove the hard drive covers away from the hard drive.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Johnathan Hammond

Membre depuis le 28/02/2018

35 317 Réputation

408 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 15

30 derniers jours : 81

Total : 266