Pièces

Aucune pièce nécessaire.

Turn the system badge fap over and place it on the base cover.
  • Turn the system badge fap over and place it on the base cover.

    • Remove the screws that secure the base cover to the computer. Release and remove the base cover from the computer.

    • NOTE: To remove the screws from the base cover, use a T5 Torx screwdriver.

      • Lift up and remove the base cover from the computer.

Ajouter un commentaire

Disconnect the battery cable from the system board [1].
  • Disconnect the battery cable from the system board [1].

  • Remove the screws that secure the battery to the computer.

  • Lift the battery off the computer [2].

Ajouter un commentaire

  • Disconnect the hard-drive cable from the system board [1].

  • Remove the screws that secure the hard drive to the computer.

  • Lift the hard drive off the computer [2].

Ajouter un commentaire

  • Disconnect the hard-drive cable from the hard drive [1].

  • Remove the screws that secure the hard-drive bracket to the hard drive.

  • Lift the hard drive off the hard-drive bracket [2].

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membre depuis le 28/02/2018

35 317 Réputation

408 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 11

30 derniers jours : 42

Total : 106