Pièces

Aucune pièce nécessaire.

Turn the system badge fap over and place it on the base cover.
  • Turn the system badge fap over and place it on the base cover.

    • Remove the screws that secure the base cover to the computer. Release and remove the base cover from the computer.

    • NOTE: To remove the screws from the base cover, use a T5 Torx screwdriver.

      • Lift up and remove the base cover from the computer.

Ajouter un commentaire

Disconnect the battery cable from the system board [1].
  • Disconnect the battery cable from the system board [1].

  • Remove the screws that secure the battery to the computer.

  • Lift the battery off the computer [2].

Ajouter un commentaire

  • Pry the securing clips away from the memory module until it pops-up. Remove the memory module from its connector on the system board.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membre depuis le 28/02/2018

35 317 Réputation

408 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 24