Pièces

Aucune pièce nécessaire.

Slide the battery release latch and remove the battery.
  • Slide the battery release latch and remove the battery.

Ajouter un commentaire

Remove the two M2 x 3-mm screws.
  • Remove the two M2 x 3-mm screws.

  • Slide the cover toward the front of the computer to release the tabs from the base assembly.

  • Remove the cover from the base assembly.

Ajouter un commentaire

Starting on the left, gently lift the LED cover and disconnect the power cable and the biometer cable if present.
  • Starting on the left, gently lift the LED cover and disconnect the power cable and the biometer cable if present.

Ajouter un commentaire

Remove the four M2 x 3-mm screws along the top of the keyboard.
  • Remove the four M2 x 3-mm screws along the top of the keyboard.

  • NOTICE: The key caps on the keyboard are fragile, easily dislodged, and time- consuming to replace. Exercise care when removing and handling the keyboard.

  • Use the metal pull tabs to gently slide the keyboard toward the back of the computer to disconnect the keyboard.

Ajouter un commentaire

NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.
  • NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory module securing clips.

  • Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the memory module pops up.

  • Remove the memory module from the connector.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membre depuis le 28/02/2018

35 317 Réputation

408 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 9

Total : 29