Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Ce dont vous avez besoin
-
-
Slide the battery release latch to the side.
-
Slide the battery out of the battery bay.
-
-
-
-
Loosen the seven captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.
-
-
-
Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
-
Remove the memory module from the connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.