Pièces

Aucune pièce nécessaire.

Slide the battery release latch until it clicks into place.
  • Slide the battery release latch until it clicks into place.

  • Turn the computer top side up, open the display, and press the power button to ground the system board.

Ajouter un commentaire

Turn the computer top side up, open the display, and press the power button to ground the system board.
  • Turn the computer top side up, open the display, and press the power button to ground the system board.

Ajouter un commentaire

  • Remove the four screws securing the hard drive assembly to the computer.

  • Pull the hard drive cable pull-tab to disconnect the cable from the system board connector.

  • Pull on the hard drive pull-tab to lift the hard drive assembly from the bay.

Ajouter un commentaire

  • Remove the four M3 x 3-mm screws securing the hard drive cage to the hard drive.

  • Lift the hard drive cage off the hard drive.

Ajouter un commentaire

  • Disconnect the hard drive cable from the connector on the hard drive..

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membre depuis le 28/02/2018

35 317 Réputation

408 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 2

Total : 11