Pièces

Aucune pièce nécessaire.

Slide the battery release latch to the side. {2}
  • Slide the battery release latch to the side. {2}

  • Slide the battery out of the battery bay. {1}

Ajouter un commentaire

Loosen the ten captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.
  • Loosen the ten captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.

Ajouter un commentaire

  • Remove the three screws securing the hard drive assembly to the computer base.

    • Pull the blue pull-tab to disconnect the hard drive assembly from the system board connector.

      • Lift the hard drive assembly out of the computer base.

Ajouter un commentaire

  • Remove the four screws that secure the hard drive bracket to the hard drive and remove the bracket.

Ajouter un commentaire

  • Pull the interposer to disconnect it from the hard drive.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membre depuis le 28/02/2018

35 317 Réputation

408 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 12

Total : 40