Pièces

Aucune pièce nécessaire.

Slide the battery lock to the open position. {2}
  • Slide the battery lock to the open position. {2}

    • Slide the battery latch release to the open position. (You may need to hold the latch release in the open position while removing the battery.){3}

      • Slide the battery out of the battery bay. {1}

Ajouter un commentaire

Remove the M2.5 x 5-mm screw that secures the hard-drive compartment cover. {2}
  • Remove the M2.5 x 5-mm screw that secures the hard-drive compartment cover. {2}

    • Remove the cover and set it aside.{1}

Ajouter un commentaire

  • NOTICE: When the hard drive is not in the computer, store the drive in protective antistatic packaging.

  • Remove the two screws securing the hard drive to the hard-drive bracket.

  • Slide the hard drive out of the hard-drive bracket.

    • Pull the mylar tab to release the hard drive.

      • Lift the hard drive out of the computer.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membre depuis le 28/02/2018

35 317 Réputation

408 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 44