Introduction

The fan helps the laptop remove the heat it produces and keeps your laptop from overheating. If your computer keeps over heating you will need to replace the fan. This guide will walk you through on how to replace the fan using only a #1 Philips head screwdriver.

Pièces

Aucune pièce nécessaire.

Make certain that the power to your laptop is off.
  • Make certain that the power to your laptop is off.

  • Press and slide the two buttons outwards and away from the battery.

Ajouter un commentaire

Slide the battery away and parallel from the laptop.
  • Slide the battery away and parallel from the laptop.

Ajouter un commentaire

  • Remove the battery from the slot.

Ajouter un commentaire

  • Unscrew the eight 6mm screws with a Philips #1 screw driver.

Ajouter un commentaire

  • Lift back cover from the groove on the left side of the cover next to the symbol.

Ajouter un commentaire

  • Unclip the power supply by pulling the cable directly up and out of the socket.

Ajouter un commentaire

  • Remove the two 3mm screws located around the edge of the fan with a Philips #1 screw driver.

Ajouter un commentaire

  • Gently lift and pull to the left until the fan is free from the heatsink.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Tangxiao Sun

Membre depuis le 19/03/2018

419 Réputation

4 tutoriels rédigés

Équipe

UMass Dartmouth, Team S3-G7, Peak Spring 2018 Membre de l'équipe UMass Dartmouth, Team S3-G7, Peak Spring 2018

UMASSD-PEAK-S18S3G7

3 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 5

Total : 64