Introduction
In this guide, we will show you how to remove and replace the Service Cover. This is a prerequisite to most other operations.
Ce dont vous avez besoin
-
-
Flip the computer over.
-
Slide the battery release latch to the unlock position.
-
-
-
Slide the other battery release latch to the unlock position.
-
-
-
-
Turn the laptop over and remove two screws securing the service cover.
-
-
-
Prise up the service cover and remove it from the computer. Clips along the edges can be snapped open except for those on the left hand edge (as shown in the photo) which have to be disengaged after all the others by romoving the cover in the direction shown.
-
On resassembly, insert the clips on the left hand edge then snap all te others home by applying firm pressure along the other edges of the cover.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Équipe
RampUP America, Inc. Membre de l'équipe RampUP America, Inc.
Community
42 membres
1 985 tutoriels rédigés
