Pièces

Aucune pièce nécessaire.

  1. Slide the release latches to unlock the battery.
    • Slide the release latches to unlock the battery.

  2. Slide the battery and remove it from the computer.
    • Slide the battery and remove it from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  3. Remove the three 8mm screws that secure the access panel to the base of the computer.
    • Remove the three 8mm screws that secure the access panel to the base of the computer.

  4. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  5. Lift the access panel up at an angle and remove it from the computer.
    • Lift the access panel up at an angle and remove it from the computer.

    • If this is all you are doing Follow Step In Reverse if not go to next step.

  6. Remove the two 5mm screws that secure the hard drive to the system.
    • Remove the two 5mm screws that secure the hard drive to the system.

  7. Lift up the hard drive at an angle from the system and remove.
    • Lift up the hard drive at an angle from the system and remove.

  8. Remove the four 5mm screws that secure the hard-drive bracket to the hard drive.
    • Remove the four 5mm screws that secure the hard-drive bracket to the hard drive.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membre depuis le 28/02/2018

35 786 Réputation

408 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

925 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 7

30 derniers jours : 41

Total : 427