Introduction

In this guide, we will show you how to remove and replace the Hard Drive.

Pièces

Aucune pièce nécessaire.

  1. Slide the release latch outwards to unlock the battery.
    • Slide the release latch outwards to unlock the battery.

  2. Remove the battery from the computer.
    • Remove the battery from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  3. Remove the screws that secure the access panel to the computer.
    • Remove the screws that secure the access panel to the computer.

    • Lift the access panel partially at a 45–degree angle.

  4. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  5. Remove the access panel from the computer.
    • Remove the access panel from the computer.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  6. Disconnect the hard drive cable from the system board and lift it up to remove it from the computer.
    • Disconnect the hard drive cable from the system board and lift it up to remove it from the computer.

    • Remove the screws that secure the hard drive to the computer.

  7. Lift the hard drive to remove it from the computer [1,2].
    • Lift the hard drive to remove it from the computer [1,2].

  8. Remove the screws that secure the hard drive to the bracket.
    • Remove the screws that secure the hard drive to the bracket.

    • Lift the hard drive from the bracket.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Ligne d'arrivée

Johnathan Hammond

Membre depuis le 28/02/2018

35 786 Réputation

408 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

925 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 10

Total : 96