Introduction
In this guide, we will be showing you how to remove the Hard Drive and Audio Board.
Ce dont vous avez besoin
-
-
Slide the base cover towards the front of the computer. Lift it up and away from the computer.
-
If this is all you are doing Follow Step In Reverse if not Go to Next Step.
-
-
-
Lift the black cable-release clip to release the battery cable from the connector on the system board and disconnect the battery cable.
-
-
-
-
Disconnect the speaker and system board cables from the audio board.
-
-
-
Remove the screws that secure the audio board and the hard drive to the computer.
-
-
-
Lift and remove the hard drive and audio board assembly from the computer.
-
-
-
Remove the screws that secure the hard-drive bracket to the hard drive.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.