Réparez vos affaires Communauté Boutique

Dell Wyse Xn0m Mouse Sensor Board Replacement

Introduction

As one of the key features of a laptop, the mouse pad is one of the elements of the device that is most likely to suffer wear over time. The right/left click buttons are especially susceptible to wear and tear, as these are mechanical systems connected to electrical boards.

If your left-click or right-click buttons aren't working, you may need to replace the board that controls those functions. Use this guide to learn how!

Ce dont vous avez besoin

  1. Dell Wyse Xn0m Mouse Sensor Board Replacement, Mouse Sensor Board: étape 1, image 1 de 1

    • Flip the device over. Unscrew nine marked 7mm Phillips #1 screws.

    Modifier

  2. Dell Wyse Xn0m Mouse Sensor Board Replacement: étape 2, image 1 de 2 Dell Wyse Xn0m Mouse Sensor Board Replacement: étape 2, image 2 de 2

    • Remove the keyboard by pushing back the tabs at the marked locations with a spudger or plastic opening tool.

    Modifier

  4. Dell Wyse Xn0m Mouse Sensor Board Replacement: étape 3, image 1 de 2 Dell Wyse Xn0m Mouse Sensor Board Replacement: étape 3, image 2 de 2

    • Turn the device around so the screen is closest to you. Lift the keyboard and detach the ribbon cable with the spudger.

    • To disconnect the cable, disengage the locking tab of the ZIF connector with the spudger and pull the cable out gently.

    Modifier

  5. Dell Wyse Xn0m Mouse Sensor Board Replacement: étape 4, image 1 de 1

    • Remove the keyboard and set it aside. Detach the other ribbon cables with the spudger.

    • Remove five 8mm Phillips #1 screws.

    Modifier

  6. Dell Wyse Xn0m Mouse Sensor Board Replacement: étape 5, image 1 de 1

    • Pry open the laptop with the plastic opening tool.

    Modifier

  7. Dell Wyse Xn0m Mouse Sensor Board Replacement: étape 6, image 1 de 2 Dell Wyse Xn0m Mouse Sensor Board Replacement: étape 6, image 2 de 2

    • Under the trackpad, detach the ribbon cables with the spudger.

    • Unscrew two 3mm Phillips #1 screws and lift the board from the pegs.

    • Remove the board from the laptop.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Jake Milligan

Membre depuis le 10/30/19

296 Réputation

1 tutoriel rédigé

Badges: 8

+ 5 badges supplémentaires

Équipe

University of Memphis, Team S2-G1, Kim Fall 2019 Membre de l'équipe University of Memphis, Team S2-G1, Kim Fall 2019

UM-KIM-F19S2G1

4 membres

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 13

Total : 597