Pièces

Aucune pièce nécessaire.

  1. Turn the tablet over. Remove the screws that secure the back-cover assembly to the display assembly.
    • Turn the tablet over.

    • Remove the screws that secure the back-cover assembly to the display assembly.

    • Using a plastic scribe, pry up along the edges of the back-cover assembly.

    • Carefully, lift the back-cover assembly and turn it over.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Remove the screws that secure the battery to the back-cover assembly.
    • Remove the screws that secure the battery to the back-cover assembly.

    • Disconnect the battery cable from the system board.

    • Lift the battery, along with its cable, off the back-cover assembly.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  4. Remove the screw that secures the solid-state drive to the back-cover assembly.
    • Remove the screw that secures the solid-state drive to the back-cover assembly.

    • Lift and slide the solid-state drive off the back-cover assembly.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Ligne d'arrivée

Johnathan Hammond

Membre depuis le 28/02/2018

35 786 Réputation

408 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

925 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 29

Total : 370