Réparez vos affaires Communauté Boutique

Dell XPS 13 9365 2-in-1 Display Assembly Replacement

Introduction

Use this guide to remove or replace this display assembly (screen) on your Dell XPS 13 9365 2-in-1 laptop. The display assembly on this laptop refers to the entire upper portion of the laptop, which houses the screen display.

Ce dont vous avez besoin

  1. Dell XPS 13 9365 2-in-1 Display Assembly Replacement, Battery: étape 1, image 1 de 1

    • Use a Torx T4 screwdriver to remove the eight screws (M2x3) that secure the base cover to the palm-rest assembly.

    Modifier

  2. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 2, image 1 de 1

    • Use your fingertips to lift the system badge open and reveal the single case screw.

    • Use a Phillips #000 screwdriver to remove the screw (M1.6x4) that secures the base cover to the palm-rest assembly.

    Modifier

  3. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 3, image 1 de 1

    • Starting from the front corner of the computer, pry up the base cover using a spudger and lift the base cover off the palm-rest assembly.

    Modifier

  4. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 4, image 1 de 1

    • Disconnect the battery cable from the system board.

    Modifier

  5. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 5, image 1 de 1

    • Use a Phillips #000 screwdriver to remove the two screws (M1.6x4) that secure the battery to the palm-rest assembly.

    Modifier

  6. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 6, image 1 de 1

    • Use a Phillips #000 screwdriver to remove the six screws (M2x3) that secure the battery to the palm-rest assembly.

    Modifier

  8. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 7, image 1 de 1

    • Lift the battery off the palm-rest assembly.

    Modifier

  9. Dell XPS 13 9365 2-in-1 Display Assembly Replacement, Display Assembly: étape 8, image 1 de 1

    • Use a Phillips #000 screwdriver to remove the screw (M1.6x2.5) that secures the wireless-card bracket to the motherboard.

    Modifier

  10. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 9, image 1 de 1

    • Lift the wireless-card bracket off the wireless card.

    Modifier

  11. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 10, image 1 de 1
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète

    • Use a pair of nylon tipped tweezers to gently disconnect the antenna cables from the wireless card.

    Modifier

  12. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 11, image 1 de 1

    • Peel off the tape that secures the display cable to the M.2 solid-state drive heatsink.

    Modifier

  13. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 12, image 1 de 2 Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 12, image 2 de 2

    • Use a Phillips #000 screwdriver to remove the two screws (M1.6x2.5) that secure the display cable bracket to the motherboard.

    • Lift the display cable bracket off the display cable.

    Modifier

  14. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 13, image 1 de 1

    • Use the pull tab to disconnect the display cable from the motherboard.

    Modifier

  15. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 14, image 1 de 1

    • Disconnect the touch-screen cable from the system board (labeled "TS").

    Modifier

  16. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 15, image 1 de 1

    • Disconnect the camera cable from the system board.

    Modifier

  17. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 16, image 1 de 3 Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 16, image 2 de 3 Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 16, image 3 de 3

    • Open the palm-rest assembly fully and place the display assembly and palm-rest assembly face down.

    • Make sure that your surface is flat and free of objects when you lay the laptop face down.

    • Use a Phillips #000 screwdriver to remove the six screws (M2.5x3.5) that secure the display hinges to the palm-rest assembly. There are three on each side.

    Modifier

  18. Dell XPS 13 9365 2-in-1 Display Assembly Replacement: étape 17, image 1 de 1

    • Lift the display assembly off the palm-rest assembly.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Melissa Schlein

Membre depuis le 03/21/22

686 Réputation

3 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

University of Alabama, Team 3-4, Bedsole Spring 2022 Membre de l'équipe University of Alabama, Team 3-4, Bedsole Spring 2022

UA-BEDSOLE-S22S3G4

3 membres

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 7

Total : 752