Introduction

solid-state drive Replacement

Pièces

Aucune pièce nécessaire.

Disconnect the battery cable from the system board.
  • Disconnect the battery cable from the system board.

    • Remove the two screws (M1.6x4) that secure the battery to the palm-rest assembly.

      • Remove the six screws (M2x3) that secure the battery to the palm-rest assembly.

Ajouter un commentaire

Lift the battery off the palm-rest assembly.
  • Lift the battery off the palm-rest assembly.

  • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Ajouter un commentaire

  • Peel off the display cable tape from the hard-drive plate.

    • Remove the two screws (M1.6x2.5) that secure the hard-drive plate to the system board.

      • Remove the hard-drive plate.

      • Slide and remove the solid-state drive from the solid-state drive slot.

  • CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.

  • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Ajouter un commentaire

Ligne d'arrivée

Johnathan Hammond

Membre depuis le 28/02/2018

35 317 Réputation

408 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 6

30 derniers jours : 53

Total : 202