Aller au contenu principal

Introduction

if your laptop is overheating and you need to replace it. here are the steps that you should follow.

  1. Remove ten 3mm screws from the back cover with a T4 screwdriver. Remove ten 3mm screws from the back cover with a T4 screwdriver.
    • Remove ten 3mm screws from the back cover with a T4 screwdriver.

  2. Remove the ribbons from both sides with a plastic iFixit opening tool.
    • Remove the ribbons from both sides with a plastic iFixit opening tool.

  3. Use a PH1 screwdriver to remove the two 3mm screws that secure the fan.
    • Use a PH1 screwdriver to remove the two 3mm screws that secure the fan.

  4. Use a plastic iFixit opening tool to remove the wire connected to the fan. Lift the fan up to remove.
    • Use a plastic iFixit opening tool to remove the wire connected to the fan.

    • Lift the fan up to remove.

Ligne d'arrivée

Ahmad EL Herbawi

Membre depuis le 01/03/2017

481 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team S6-G3, Lacy Spring 2017 Membre de l'équipe USF Tampa, Team S6-G3, Lacy Spring 2017

USFT-LACY-S17S6G3

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 967