Aller au contenu principal

Introduction

The base cover is important as it is where the inner components of the laptop is housed. It is used to protect the parts inside from any damage. Removal of the base cover will be covered in this guide.

Pièces

Aucune pièce spécifiée.

  1. Using a T5 Torx screwdriver, remove ten 3mm screws. Using a T5 Torx screwdriver, remove ten 3mm screws. Using a T5 Torx screwdriver, remove ten 3mm screws.
    • Using a T5 Torx screwdriver, remove ten 3mm screws.

  2. Lift the plastic tab. Remove two 3mm Phillips #0 screws under the plastic tab.
    • Lift the plastic tab.

    • Remove two 3mm Phillips #0 screws under the plastic tab.

  3. Lift the lower case off.
    • Lift the lower case off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Larissa Omura

Membre depuis le 04/04/2019

738 Réputation

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 20

Total : 559