Aller au contenu principal

Introduction

Internal fans keep a computer at a stable temperature while operating. A faulty fan can cause a computer to overheat. It is important that all fans are in working order. Replacing a fan is an important skill for desktop PC users.

Pièces

Aucune pièce spécifiée.

  1. Unplug the computer from the power supply before any maintenance or disassembly.
    • Unplug the computer from the power supply before any maintenance or disassembly.

    • Remove the two Phillips #2 head 5mm screws from the back side of the computer case. You only need to remove the screws that hold down the panel.

    • These screws can usually be removed by hand.

    • Be sure to wear an anti-static bracelet or use an anti-static mat to ensure important components are not damaged by static electricity.

    This depends on the model of system. Some systems have a lever/latch to pull to release the cover. Many Dell and HP models use latches to open the covers (no tools required to open the system). Some systems need a screwdriver to remove the screws. Some are Phillips screws, others may be Torx.

    Dave Ellefson - Réponse

    This is correct.

    DistroHopper39F -

  2. Next, remove the side panel of the computer case to allow access into the computer. Slide the panel towards the back of the computer and lift it up to remove. If there is a fan mounted on the side panel, make sure to unplug the cable before fully removing the panel.
    • Next, remove the side panel of the computer case to allow access into the computer. Slide the panel towards the back of the computer and lift it up to remove.

    • If there is a fan mounted on the side panel, make sure to unplug the cable before fully removing the panel.

  3. Push to unlatch three grey connectors on the front panel. Push to unlatch three grey connectors on the front panel.
    • Push to unlatch three grey connectors on the front panel.

  4. Disconnect the front panel from the computer face.
    • Disconnect the front panel from the computer face.

  5. Remove four Phillips #2 head, 5mm screws holding in the fan.
    • Remove four Phillips #2 head, 5mm screws holding in the fan.

  6. Slide the fan out from the side of the casing.
    • Slide the fan out from the side of the casing.

  7. Disconnect the power cable from the fan.
    • Disconnect the power cable from the fan.

Conclusion

To reassemble your device, follow these instructions in reverse order.

36 autres ont terminé cette réparation.

David Lennon

Membre depuis le 14/04/2015

9 542 Réputation

10 tutoriels rédigés

Équipe

Cal Poly, Team 4-5, Maness Spring 2015 Membre de l'équipe Cal Poly, Team 4-5, Maness Spring 2015

CPSU-MANESS-S15S4G5

4 membres

29 tutoriels rédigés

Un commentaire

My two bottom connecters holding the face of my pc case have screws in them. Problem is that I can't fit a screw driver in the gaps to remove the screws! Any tips?

Jimmy Jam - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 12

7 derniers jours : 42

30 derniers jours : 202

Total : 23,393