Aller au contenu principal

Introduction

Hard drives store most of the information on a computer. The hard drive of a computer must be replaced if the computer crashes. Hard drive replacement is an important skill for desktop PC users.

Pièces

Aucune pièce spécifiée.

  1. Unplug the computer from the power supply before any maintenance or disassembly.
    • Unplug the computer from the power supply before any maintenance or disassembly.

    • Remove the two Phillips #2 head 5mm screws from the back side of the computer case. You only need to remove the screws that hold down the panel.

    • These screws can usually be removed by hand.

    • Be sure to wear an anti-static bracelet or use an anti-static mat to ensure important components are not damaged by static electricity.

  2. Next, remove the side panel of the computer case to allow access into the computer. Slide the panel towards the back of the computer and lift it up to remove. If there is a fan mounted on the side panel, make sure to unplug the cable before fully removing the panel.
    • Next, remove the side panel of the computer case to allow access into the computer. Slide the panel towards the back of the computer and lift it up to remove.

    • If there is a fan mounted on the side panel, make sure to unplug the cable before fully removing the panel.

  3. Remove two Phillips #2 head 5mm screws from the back side of the computer case.
    • Remove two Phillips #2 head 5mm screws from the back side of the computer case.

  4. Next, remove the side panel of the computer case to allow access into the computer. Next, remove the side panel of the computer case to allow access into the computer.
    • Next, remove the side panel of the computer case to allow access into the computer.

  5. Remove two Phillips #2 head 5mm screws holding the hard drive in place.
    • Remove two Phillips #2 head 5mm screws holding the hard drive in place.

  6. Remove two Phillips #2 head 5mm screws holding in the other side of the hard drive.
    • Remove two Phillips #2 head 5mm screws holding in the other side of the hard drive.

  7. Slide the hard drive out from the metal casing.
    • Slide the hard drive out from the metal casing.

  8. Remove the cables from the back of the hard drive.
    • Remove the cables from the back of the hard drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

52 autres ont terminé cette réparation.

Rubin Girling

Membre depuis le 14/04/2015

628 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 4-5, Maness Spring 2015 Membre de l'équipe Cal Poly, Team 4-5, Maness Spring 2015

CPSU-MANESS-S15S4G5

4 membres

29 tutoriels rédigés

Un commentaire

Footnote: the processing of removing a drive from your system may vary slightly depending on the manufacturer of your system, or if you built it yourself; the manufacturer of the case.

Jack G - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 13

30 derniers jours : 81

Total : 6,902