Aller au contenu principal

DigiLand DL8006 Internal Ribbon Replacement

Ce dont vous avez besoin

  1. DigiLand DL8006 Internal Ribbon Replacement, Internal Ribbon: étape 1, image 1 de 3 DigiLand DL8006 Internal Ribbon Replacement, Internal Ribbon: étape 1, image 2 de 3 DigiLand DL8006 Internal Ribbon Replacement, Internal Ribbon: étape 1, image 3 de 3
    • Flip the tablet to where its back is facing upward.

    • Remove the back cover by prying the sides with a plastic opening tool.

    • Lay the opened device with the circuit board exposed.

  2. DigiLand DL8006 Internal Ribbon Replacement: étape 2, image 1 de 2 DigiLand DL8006 Internal Ribbon Replacement: étape 2, image 2 de 2
    • Remove the silver/metallic tape covering the blue and red wires overlapping the upper and lower end of the ribbon cable.

  3. DigiLand DL8006 Internal Ribbon Replacement: étape 3, image 1 de 3 DigiLand DL8006 Internal Ribbon Replacement: étape 3, image 2 de 3 DigiLand DL8006 Internal Ribbon Replacement: étape 3, image 3 de 3
    Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète
    • Remove the ribbon cable by pulling the locking tab of the ZIF connector up and pulling the ribbon cable out with tweezers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Landon Choi

Membre depuis le 10/30/19

379 Réputation

3 tutoriels rédigés

Équipe

University of Memphis, Team S2-G5, Kim Fall 2019 Membre de l'équipe University of Memphis, Team S2-G5, Kim Fall 2019

UM-KIM-F19S2G5

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 164