Introduction
When working on replacing the Digiland DL1168A motherboard, it is important to keep in mind when working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. Common reasons for motherboard failure include excessive electrical shocks, increased heat, or physical damage to the device.
Ce dont vous avez besoin
-
-
Using an opening tool, begin softly prying open device by first inserting it in between the front and back panels.
-
Continue prying the edges while moving around the device's perimeter until the back can be easily removed.
-
-
-
-
Using a pair of tweezers, carefully lift the three zero insertion force connectors (ZIF) attached to the motherboard.
-
-
-
Using the soldering iron, desolder all eight wires connected to the motherboard.
-
Removing the red wire then the black wire (2 wires).
-
Desolder the three wires and remove them.
-
Remove the single grey wire.
-
Remove the yellow and red twisted wires and black and red twisted wires connected to the speakers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Équipe
Grand Valley State University, Team S1-G1, DeVasto Fall 2019 Membre de l'équipe Grand Valley State University, Team S1-G1, DeVasto Fall 2019
GVSU-DEVASTO-F19S1G1
4 membres
4 tutoriels rédigés
