Réparez vos affaires Communauté Boutique

Digital2 D2-861G Battery Replacement

Introduction

This guide will be showing you how to replace the 3.7V battery in the back of the tablet. Be sure to carefully remove the battery from the back of the screen and do not puncture it.

Battery information:

- JZ Li-ion PL28106110

+ 3.7V 3100MAH 1406

Ce dont vous avez besoin

  1. Digital2 D2-861G Battery Replacement, Battery: étape 1, image 1 de 1

    • Working on your device while powered on may result in electric shock. Make sure to unplug and power down your device before you begin.

    • Place your device on a soft cloth to avoid scratching the screen.

    • Flip your device over so back panel is facing upwards

    Traduire

  2. Digital2 D2-861G Battery Replacement: étape 2, image 1 de 2 Digital2 D2-861G Battery Replacement: étape 2, image 2 de 2

    • Do not use a lot of force as it can break the clips or the back panel.

    • Insert spudger in the slot below the micro SD card

    • You should hear clips releasing as you pry along the edges.

    • With the spudger tool, run along the edges of the backing undoing 20 plastic clips.

    Traduire

  4. Digital2 D2-861G Battery Replacement: étape 3, image 1 de 3 Digital2 D2-861G Battery Replacement: étape 3, image 2 de 3 Digital2 D2-861G Battery Replacement: étape 3, image 3 de 3

    • Look at the images to locate the black tabs.

    • Carefully remove the tape to avoid damaging the device.

    • Remove ALL the yellow tape securing the gold colored ZIF (Zero insertion force) connector and the battery. Discard or save the tape if you would like.

    • To unclip the connector. Go under the black tab with a spudger or finger nail and simply lift up.

    Traduire

  5. Digital2 D2-861G Battery Replacement: étape 4, image 1 de 2 Digital2 D2-861G Battery Replacement: étape 4, image 2 de 2

    • Make sure to not bend or puncture the battery when removing it.

    • Locate the bundled cable connector and disconnect it by simply pulling it gently with your hands or using a spudger.

    • Use prying tools to carefully break the adhesive under the battery

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Dalton Berg

Membre depuis le 09/29/16

201 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Équipe

Eastern Washington University, Team 1-3, Crane Fall 2016 Membre de l'équipe Eastern Washington University, Team 1-3, Crane Fall 2016

EWU-CRANE-F16S1G3

3 membres

6 tutoriels rédigés

Un commentaire

where do you find the replacement battery?

rsdii - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 8

Total : 932