Dirt Devil Scorpion Quick Flip Power Cord Replacement - Tutoriel de réparation iFixit

Introduction

The power cord on the Dirt Devil Scorpion Quick Flip has been known to fail by consumers. This guide walks you through the replacement of a power cord on one of these vacuums.

Ce dont vous avez besoin

Étape 1 Power Cord

Dirt Devil Scorpion Quick Flip Power Cord Replacement, Power Cord: étape 1, image 1 de 1

While holding the device by the handle, press the button on the left-hand side of the vacuum handle in order to release the nozzle from the body.

Étape 2

Dirt Devil Scorpion Quick Flip Power Cord Replacement: étape 2, image 1 de 2

Dirt Devil Scorpion Quick Flip Power Cord Replacement: étape 2, image 2 de 2

Using a Phillips #1 Screwdriver, remove all six of the 4 mm screws holding the shell together.

Étape 3

Dirt Devil Scorpion Quick Flip Power Cord Replacement: étape 3, image 1 de 1

Using utility scissors, cut the black and white cables approximately an inch and a half above where they connect to the faulty power cord.

Étape 4

Dirt Devil Scorpion Quick Flip Power Cord Replacement: étape 4, image 1 de 1

Using a soldering iron, fuse the black and white cables from the new power cord to where the previous cord was cut away.
Using electrical tape, cover the exposed area.
Check out our How to Solder and Desolder Connections guide if you are unfamiliar with the soldering process.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Corbet E Warren

Membre depuis le 10/02/19

109 Réputation

1 tutoriel rédigé

Équipe

The Citadel Military College of South Carolina, Team S3-G14, Eggleston Fall 2019 Membre de l'équipe The Citadel Military College of South Carolina, Team S3-G14, Eggleston Fall 2019

CMCSC-EGGLESTON-F19S3G14

3 membres

3 tutoriels rédigés

0 commentaires

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 13

Total : 291