Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

This is the beginning process to remove or replace any functional component in the AirPort.

  1. Remove the three 5mm T7 Torx screws from the back panel.
    • Remove the three 5mm T7 Torx screws from the back panel.

  2. Remove one 5mm phillips screw located under the identification sticker.  You will need to remove the sticker or make a hole to get to the screw.
    • Remove one 5mm phillips screw located under the identification sticker. You will need to remove the sticker or make a hole to get to the screw.

  3. OUVRIR TOUS LES ONGLETS

    Kits de mise à jour de RAM pour Mac

    Voir les kits

    Assez de RAM
    pour ouvrir tous les onglets

    Voir les kits
  4. Separate the bottom and top casings.
    • Separate the bottom and top casings.

  5. Remove the metal case from the top case of the AirPort, there are no screws holding it on. Remove the four screws from the metal casing.
    • Remove the metal case from the top case of the AirPort, there are no screws holding it on.

    • Remove the four screws from the metal casing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Michael Garcia

Membre depuis le 12/10/2011

369 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 17-15, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 17-15, Regan Fall 2011

CPSU-REGAN-F11S17G15

3 membres

7 tutoriels rédigés

Whoa, who’d have thought there was a hidden 5mm phillips under the serial number that does the trick? I’ve had this little beauty hanging around for decades, and my six year old started using it as a flying saucer with his lego creations, and it took me three months of pandemic before I picked up my screwdrivers and tried to take it apart so that he could really use it. For now it’s just empty, and he closes some figures in it with a rubber band and flies it around. Someday I’ll get that dremel i’ve wanted and make him some sort of hatch and latch for it, maybe add some lego baseplate bits to it or something, it can join the rebel alliance for reals.

bitfool - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 2,010