Difficulté
Facile
Étapes
4
Temps nécessaire
5 minutes
- Cover 4 étapes
Problème de balisage
Ce tutoriel nécessite de meilleures balises. Améliorez-le par des corrections ou des annotations de balisage.
Introduction
Removing the cover of the Apple IIc is the precursor to any repair on a computer and it allows you to view the eternal workings of this device.
Pièces
Aucune pièce nécessaire.
-
Remove the six 19 mm long screws with a #2 Phillips head screwdriver.
-
Release the catch by pushing it in using a plastic opening tool.
-
Slide the case toward the ports on the back, then grip under the catch and pull up while moving toward the ports to remove.
This step is wrong. The ports cover should be removed with a plastic disassembly tool first. Failure to do this will lead to a set of broken plastic hooks.
-
Lift the handle straight up to remove.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce guide.
6 autre(s) ont terminé cette réparation.
Équipe
Cal Poly, Team 21-23, Maness Fall 2011 Membre de l'équipe Cal Poly, Team 21-23, Maness Fall 2011
CPSU-MANESS-F11S21G23
4 membres
6 tutoriels rédigés
2 commentaires
The //c is designed to be popped open. Remove the 6 screws as described. Flip the handle down and tip the //c 3-4 inches over a hard surface and let it drop. The handle will pop the rear catches off safely.
It looks and sounds scary but it's how Apple trained dealer techs to open the machine. There isn't anything in a //c that is shock sensitive.
