Aller au contenu principal

Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.

Ce dont vous avez besoin

  1. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 1, image 1 de 1
    • Turn off the power and remove the battery before working on your Eee PC

    • Start by removing the keyboard

    • There are four latches on the top of the keyboard, use a paper clip or other object to disengage the latches

    • You may have to pull the keyboard up enough with the object - there is no spring mechanism to pop the keyboard out. One trick is after lifting it enough, to slide it (not too much) upward to remove the bottom side.

    • The keyboard assembly has also two plastic retention points on the sides, and some thermal tape sticking the keyboard down.

    • Caution: the keyboard has a ribbon connector underneath it which must be carefully unplugged before fully removing the keyboard.

  2. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 2, image 1 de 2 : étape 2, image 2 de 2
    • 7 screws hold the front plate to the motherboard, as well as the ones on the rear of the PC.

    • Before taking off the case, you need to disconnect the touchpad and hotkeys cables.

Ligne d'arrivée

Une autre personne a terminé cette réparation.

adammw

Membre depuis le 01/21/11

111 Réputation

1 tutoriel rédigé

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 10

30 derniers jours : 14

Total : 3,175