Réparez vos affaires Communauté Boutique

Disassembling Canon EOS Rebel XS Front Cover

Introduction

Use this guide to replace a damaged front cover or to access the inner parts of the camera.

Ce dont vous avez besoin

  1. Disassembling Canon EOS Rebel XS Front Cover, Latch Side Cover: étape 1, image 1 de 1

    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

    Modifier

  2. Disassembling Canon EOS Rebel XS Front Cover: étape 2, image 1 de 1

    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

    Modifier

  4. Disassembling Canon EOS Rebel XS Front Cover, Disassembling Canon EOS Rebel XS Front Cover: étape 3, image 1 de 1

    • Remove three medium length screws from the bottom of the camera

    Modifier

  5. Disassembling Canon EOS Rebel XS Front Cover: étape 4, image 1 de 1

    • Remove the two medium length screws on the front panel of the camera above the lens mount.

    • Once you done, you may use the Spudger to panel from non-grip side.

    • If you start on the grip side, it will be more challenging to loosen the panel.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 8 autres contributeurs

Daniel Bussone

Membre depuis le 01/28/11

1 251 Réputation

11 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

Cal Poly, Team 3-41, Regan Winter 2011 Membre de l'équipe Cal Poly, Team 3-41, Regan Winter 2011

CPSU-REGAN-W11S3G41

2 membres

21 tutoriels rédigés

2 commentaires

This should be labelled: Easy.

tjt263 - Réponse

Okay, there are several steps missing.

tjt263 - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 7

Total : 5,261