Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
The outer casing covers the internal mechanisms of the camera.
Ce dont vous avez besoin
-
-
Remove the 2 screws (2.41 mm long) on the side of the camera next to the LCD screen.
-
Remove the 2 screws (4.08 mm) on the other side. One is located under the rubber USB flap.
-
Remove the last screw (2.59 mm) located on the bottom of the camera.
-
Slowly pull the back cover of the camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.