Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
The LCD display can be removed and replaced if it is cracked or broken.
Ce dont vous avez besoin
-
-
Remove the two 2.4 mm screws on the side of the camera that are next to the LCD screen using a Phillips #00 screwdriver.
-
Remove the two 4.1 mm screws on the other side using a Phillips #00 screwdriver.
-
Remove the single 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.
-
Slowly pull the back cover off of the camera.
-
-
-
-
Remove the screws (2.88 mm) at the top right corner and bottom left corner of the LCD screen.
-
Disconnect the ribbons connecting the screen to the camera.
-
Lift off the screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Équipe
Cal Poly, Team 13-3, Forte Winter 2011 Membre de l'équipe Cal Poly, Team 13-3, Forte Winter 2011
CPSU-FORTE-W11S13G3
5 membres
8 tutoriels rédigés
