Réparez vos affaires Communauté Boutique

Disassembling Compaq Mini 110 Hard Drive

Ce dont vous avez besoin

  1. Disassembling Compaq Mini 110 Hard Drive, Battery: étape 1, image 1 de 2 Disassembling Compaq Mini 110 Hard Drive, Battery: étape 1, image 2 de 2

    • Locate the battery and the battery tabs on the bottom of the Compaq Mini.

    Traduire

  2. Disassembling Compaq Mini 110 Hard Drive: étape 2, image 1 de 3 Disassembling Compaq Mini 110 Hard Drive: étape 2, image 2 de 3 Disassembling Compaq Mini 110 Hard Drive: étape 2, image 3 de 3

    • Push both tabs inward simultaneously and slide the battery out.

    Traduire

  3. Disassembling Compaq Mini 110 Hard Drive, RAM: étape 3, image 1 de 2 Disassembling Compaq Mini 110 Hard Drive, RAM: étape 3, image 2 de 2

    • Use a Philips #0 screwdriver to unscrew the two screws covering the memory compartment on the bottom of the laptop and remove the cover.

    Traduire

  4. Disassembling Compaq Mini 110 Hard Drive: étape 4, image 1 de 1

    • Push out the side tabs simultaneously and pull out the old RAM module.

    • When inserting a new RAM stick, be sure to evenly insert the gold pins in the same orientation that the old module was removed. While sliding the module in, press the side tabs in place.

    Traduire

  6. Disassembling Compaq Mini 110 Hard Drive, Keyboard: étape 5, image 1 de 2 Disassembling Compaq Mini 110 Hard Drive, Keyboard: étape 5, image 2 de 2

    • Remove the rubber pads located on the corners of your Compaq Mini.

    • There may be junk underneath it. This is residue left from the glue that held on the rubber pad. Just scrape it away to find the screw.

    Traduire

  7. Disassembling Compaq Mini 110 Hard Drive: étape 6, image 1 de 2 Disassembling Compaq Mini 110 Hard Drive: étape 6, image 2 de 2

    • Unscrew all the corner screws. There are four total, one under each rubber pad.

    Traduire

  8. Disassembling Compaq Mini 110 Hard Drive: étape 7, image 1 de 2 Disassembling Compaq Mini 110 Hard Drive: étape 7, image 2 de 2

    • Unscrew the screw for the bottom case located in the RAM compartment.

    Traduire

  9. Disassembling Compaq Mini 110 Hard Drive: étape 8, image 1 de 2 Disassembling Compaq Mini 110 Hard Drive: étape 8, image 2 de 2

    • Remove the three screws in the silver tabs at the back of the keyboard.

    • These are located at the back of the base under the screen.

    • Lift the keyboard away from the laptop.

    Traduire

  10. Disassembling Compaq Mini 110 Hard Drive, Hard Drive: étape 9, image 1 de 1

    • Remove the three screws.

    Traduire

  11. Disassembling Compaq Mini 110 Hard Drive: étape 10, image 1 de 2 Disassembling Compaq Mini 110 Hard Drive: étape 10, image 2 de 2

    • Pull up on the tab.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

15 autres ont terminé cette réparation.

Auteur

avec 7 autres contributeurs

alea

Membre depuis le 10/06/10

1 405 Réputation

14 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

Cal Poly, Team 22-2, Maness Fall 2010 Membre de l'équipe Cal Poly, Team 22-2, Maness Fall 2010

CPSU-MANESS-F10S22G2

6 membres

20 tutoriels rédigés

2 commentaires

still cannot remove back of my compacq mini. i have taken all screws out as told but back refuses to part.

madudman - Réponse

still cannot remove back of my compact after removing all screws. are ther any more hidden clips ? mike

madudman - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 6

30 derniers jours : 46

Total : 38,731