Aller au contenu principal

Disassembling Eureka 1660SP Motor Housing

Ce dont vous avez besoin

  1. Disassembling Eureka 1660SP Motor Housing, Motor Housing: étape 1, image 1 de 2 Disassembling Eureka 1660SP Motor Housing, Motor Housing: étape 1, image 2 de 2
    • Before you start, make sure your vacuum is unplugged the power outlet.

    • Press and hold down the black button below the handle while pulling the pole out.

  2. Disassembling Eureka 1660SP Motor Housing: étape 2, image 1 de 2 Disassembling Eureka 1660SP Motor Housing: étape 2, image 2 de 2
    • Press the black separator switch to separate the top and bottom halves of the vacuum.

  3. Disassembling Eureka 1660SP Motor Housing: étape 3, image 1 de 3 Disassembling Eureka 1660SP Motor Housing: étape 3, image 2 de 3 Disassembling Eureka 1660SP Motor Housing: étape 3, image 3 de 3
    • Use a #2 Phillips head screwdriver to remove six 13.9mm screws from the side of the motor housing (top half) as shown.

    • Remove two 14.1mm screws from the front face of the housing. You are now all set to open the housing.

    • Keep a watchful eye on the two screws from the front face. These two have additional collars to their necks and will not fit in any of the other holes, yet no other screw will fit in their spots without the collar.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jennifer Sheils

Membre depuis le 09/07/13

4 Réputation

2 tutoriels rédigés

Équipe

UMass Dartmouth, Team 1-1, Gulbrandsen Fall 2013 Membre de l'équipe UMass Dartmouth, Team 1-1, Gulbrandsen Fall 2013

UMASSD-GULBRANDSEN-F13S1G1

3 membres

12 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 7

Total : 338