Introduction

This is a guide to take part the shell of the base from the logic board. After completing this guide, you will have access to the logic board and all other interior parts of the telephone.

Pièces

Aucune pièce nécessaire.

Unplug the device before proceeding.
  • Unplug the device before proceeding.

  • Remove the phone cord from the phone jack from the base of the headset.

    • Use a plastic opening tool to remove the phone cord.

Ajouter un commentaire

Remove the phone cord screw cap.
  • Remove the phone cord screw cap.

    • Unscrew the 7.5mm screw.

    • Remove the screw cap.

  • Remove the cord from the phone base.

Ajouter un commentaire

  • Use finger to remove the battery cover.

Ajouter un commentaire

  • Remove the Volume Dial by gently grasping the dial and pulling away from the base.

Ajouter un commentaire

  • Remove the 6 screws from the base shell.

    • Remove the 3 12mm screws with the Philips head #1 screw driver.

    • Remove the 3 18mm screws with the Philips head #1 screw driver.

Ajouter un commentaire

  • Pry off the base shell using a Plastic Opener Tool.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alles Rebel

Membre depuis le 20/09/2012

63 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 16-59, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 615