Réparez vos affaires Communauté Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Disassembling General Electric Telephone 2-9710A Base Shell

Introduction

This is a guide to take part the shell of the base from the logic board. After completing this guide, you will have access to the logic board and all other interior parts of the telephone.

Ce dont vous avez besoin

  1. Disassembling General Electric Telephone 2-9710A Base Shell, Phone Cord: étape 1, image 1 de 2 Disassembling General Electric Telephone 2-9710A Base Shell, Phone Cord: étape 1, image 2 de 2

    • Unplug the device before proceeding.

    • Using a plastic opening tool, remove the phone cord from the phone jack at the base of the headset.

    • To release the cable, gently press down on the top plastic tab of the connector.

    Traduire

  2. Disassembling General Electric Telephone 2-9710A Base Shell: étape 2, image 1 de 3 Disassembling General Electric Telephone 2-9710A Base Shell: étape 2, image 2 de 3 Disassembling General Electric Telephone 2-9710A Base Shell: étape 2, image 3 de 3

    • Remove the 7.5 mm screw.

    • Remove the screw cap.

    • Pull up the phone cord to remove it from the base.

    Traduire

  4. Disassembling General Electric Telephone 2-9710A Base Shell, 9V Base Battery: étape 3, image 1 de 2 Disassembling General Electric Telephone 2-9710A Base Shell, 9V Base Battery: étape 3, image 2 de 2

    • Remove the battery compartment door (located on the bottom of the radio) by applying thumb pressure to the area indicated on the battery door.

    • Slide the door off of the battery compartment.

    • Remove the battery from the phone.

    Traduire

  5. Disassembling General Electric Telephone 2-9710A Base Shell, Base Shell: étape 4, image 1 de 2 Disassembling General Electric Telephone 2-9710A Base Shell, Base Shell: étape 4, image 2 de 2

    • Remove the Volume Dial by gently grasping the dial and pulling away from the base.

    Traduire

  6. Disassembling General Electric Telephone 2-9710A Base Shell: étape 5, image 1 de 1

    • Remove the 6 screws from the base shell.

    • Remove the 3 12mm screws with the Philips head #1 screw driver.

    • Remove the 3 18mm screws with the Philips head #1 screw driver.

    Traduire

  7. Disassembling General Electric Telephone 2-9710A Base Shell: étape 6, image 1 de 2 Disassembling General Electric Telephone 2-9710A Base Shell: étape 6, image 2 de 2

    • Pry off the base shell using a Plastic Opener Tool.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 10 autres contributeurs

Alles Rebel

Membre depuis le 09/20/12

72 Réputation

3 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

Cal Poly, Team 16-59, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 membres

17 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 779