Aller au contenu principal

Disassembling General Electric Telephone 2-9710A Handset

Ce dont vous avez besoin

  1. Disassembling General Electric Telephone 2-9710A Handset, Phone Cord: étape 1, image 1 de 2 Disassembling General Electric Telephone 2-9710A Handset, Phone Cord: étape 1, image 2 de 2
    • Unplug the device before proceeding.

    • Using a plastic opening tool, remove the phone cord from the phone jack at the base of the headset.

    • To release the cable, gently press down on the top plastic tab of the connector.

  2. Disassembling General Electric Telephone 2-9710A Handset: étape 2, image 1 de 3 Disassembling General Electric Telephone 2-9710A Handset: étape 2, image 2 de 3 Disassembling General Electric Telephone 2-9710A Handset: étape 2, image 3 de 3
    • Remove the 7.5 mm screw.

    • Remove the screw cap.

    • Pull up the phone cord to remove it from the base.

  3. Disassembling General Electric Telephone 2-9710A Handset, General Electric Telephone 2-9710A Handset: étape 3, image 1 de 2 Disassembling General Electric Telephone 2-9710A Handset, General Electric Telephone 2-9710A Handset: étape 3, image 2 de 2
    • Remove the plastic cover with a plastic opening tool by gently sliding the tool underneath the plastic and pry the cover off.

  4. Disassembling General Electric Telephone 2-9710A Handset: étape 4, image 1 de 1
    • Remove the paper with a plastic opening tool by gently sliding the tool underneath and prying the paper away from the phone.

  5. Disassembling General Electric Telephone 2-9710A Handset: étape 5, image 1 de 2 Disassembling General Electric Telephone 2-9710A Handset: étape 5, image 2 de 2
    • Remove the rubber stopper with a plastic opening tool by gently sliding the tool underneath and pry away from the phone.

  6. Disassembling General Electric Telephone 2-9710A Handset: étape 6, image 1 de 2 Disassembling General Electric Telephone 2-9710A Handset: étape 6, image 2 de 2
    • Remove the two 2.1 mm screws with a Phillips #1 screwdriver.

  7. Disassembling General Electric Telephone 2-9710A Handset: étape 7, image 1 de 1
    • Pull apart the handset by pulling the top shell away from the other half of the phone.

  8. Disassembling General Electric Telephone 2-9710A Handset: étape 8, image 1 de 2 Disassembling General Electric Telephone 2-9710A Handset: étape 8, image 2 de 2
    • Remove 3 screws attaching the motherboard to shell.

    • Remove the 13 mm screw with a Philips #1 screwdriver.

    • Remove the two 13 mm screws with washers with a Philips #1 screwdriver.

  9. Disassembling General Electric Telephone 2-9710A Handset: étape 9, image 1 de 2 Disassembling General Electric Telephone 2-9710A Handset: étape 9, image 2 de 2
    • Slide the phone jack out from the shell by gently lifting up the female phone jack connector.

  10. Disassembling General Electric Telephone 2-9710A Handset: étape 10, image 1 de 1
    • Without removing the motherboard completely, pull up slightly and pivot the motherboard out of the shell.

    • Be careful not to pull the connectors out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alles Rebel

Membre depuis le 09/20/12

72 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 16-59, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 16-59, Forte Fall 2012

CPSU-FORTE-F12S16G59

4 membres

17 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 22

Total : 2,699