Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

It is necessary that the HP Compaq NC6120 be opened up before key components within can be replaced. This can be done with some patience after removing key screws and lifting up a panel.

  1. Flip laptop so the backside is facing upwards. Pull the two plastic switches at the top of the backside of the computer outwards, and remove the battery. Pull the two plastic switches at the top of the backside of the computer outwards, and remove the battery.
    • Flip laptop so the backside is facing upwards.

    • Pull the two plastic switches at the top of the backside of the computer outwards, and remove the battery.

  2. Remove all 13 screws from the back panel of the computer, the 2 torx screws under the battery, the 2 under the ram memory panel as well as the four screws at the hinge of the computer (also attaching the back panel to the rest of the computer). All screws are 9.8mm 3.0 flatheads except for the two under the battery witch are T9 torx. Remove all 13 screws from the back panel of the computer, the 2 torx screws under the battery, the 2 under the ram memory panel as well as the four screws at the hinge of the computer (also attaching the back panel to the rest of the computer). All screws are 9.8mm 3.0 flatheads except for the two under the battery witch are T9 torx.
    • Remove all 13 screws from the back panel of the computer, the 2 torx screws under the battery, the 2 under the ram memory panel as well as the four screws at the hinge of the computer (also attaching the back panel to the rest of the computer). All screws are 9.8mm 3.0 flatheads except for the two under the battery witch are T9 torx.

  3. Open up the laptop so that the screen is facing towards you. Push the monitor back until it is flat, parallel to the keyboard. Open up the laptop so that the screen is facing towards you. Push the monitor back until it is flat, parallel to the keyboard.
    • Open up the laptop so that the screen is facing towards you. Push the monitor back until it is flat, parallel to the keyboard.

  4. Using a plastic spudger, remove the plastic panel located between the keyboard and monitor. It should pop off easily with the spudger and can then be pulled away. Using a plastic spudger, remove the plastic panel located between the keyboard and monitor. It should pop off easily with the spudger and can then be pulled away.
    • Using a plastic spudger, remove the plastic panel located between the keyboard and monitor. It should pop off easily with the spudger and can then be pulled away.

  5. Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch

    Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch
  6. Remove the white cable attached to the just-removed plastic panel from the motherboard. Remove the white cable attached to the just-removed plastic panel from the motherboard.
    • Remove the white cable attached to the just-removed plastic panel from the motherboard.

  7. Flip the keyboard away from the monitor, rotating it so that the keys are face down on the mousepad. Remove the black cord at the bottom of the keyboard that connects it to the motherboard. The keyboard is now free and can be removed. Flip the keyboard away from the monitor, rotating it so that the keys are face down on the mousepad. Remove the black cord at the bottom of the keyboard that connects it to the motherboard. The keyboard is now free and can be removed.
    • Flip the keyboard away from the monitor, rotating it so that the keys are face down on the mousepad. Remove the black cord at the bottom of the keyboard that connects it to the motherboard. The keyboard is now free and can be removed.

  8. Remove the two 9.8mm 3.0 flathead screws, there is one at each of the hinges. Remove the two 9.8mm 3.0 flathead screws, there is one at each of the hinges. Remove the two 9.8mm 3.0 flathead screws, there is one at each of the hinges.
    • Remove the two 9.8mm 3.0 flathead screws, there is one at each of the hinges.

  9. Unplug the black cable with rectangular white plastic head from the motherboard. It is located at the top left of the motherboard, directly below the left hinge. Unplug the black cable with rectangular white plastic head from the motherboard. It is located at the top left of the motherboard, directly below the left hinge. Unplug the black cable with rectangular white plastic head from the motherboard. It is located at the top left of the motherboard, directly below the left hinge.
    • Unplug the black cable with rectangular white plastic head from the motherboard. It is located at the top left of the motherboard, directly below the left hinge.

  10. Pull the monitor directly upwards from where it lay. The two metal hinges should easily slide out of their holes and the monitor will be disconnected from the motherboard. Pull the monitor directly upwards from where it lay. The two metal hinges should easily slide out of their holes and the monitor will be disconnected from the motherboard.
    • Pull the monitor directly upwards from where it lay. The two metal hinges should easily slide out of their holes and the monitor will be disconnected from the motherboard.

  11. Using a spudger, pry the black plastic panel (with mousepad) off of the motherboard. Using a spudger, pry the black plastic panel (with mousepad) off of the motherboard. Using a spudger, pry the black plastic panel (with mousepad) off of the motherboard.
    • Using a spudger, pry the black plastic panel (with mousepad) off of the motherboard.

  12. Unplug the white cord connecting the mousepad to the motherboard from the motherboard, and pull off the entire plastic panel. Unplug the white cord connecting the mousepad to the motherboard from the motherboard, and pull off the entire plastic panel. Unplug the white cord connecting the mousepad to the motherboard from the motherboard, and pull off the entire plastic panel.
    • Unplug the white cord connecting the mousepad to the motherboard from the motherboard, and pull off the entire plastic panel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autre(s) ont terminé cette réparation.

Mateo Cuellar

Membre depuis le 08/04/2015

595 Réputation

4 tutoriels rédigés

Équipe

Cal Poly, Team 17-4, Forte Spring 2015 Membre de l'équipe Cal Poly, Team 17-4, Forte Spring 2015

CPSU-FORTE-S15S17G4

3 membres

6 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 8

30 derniers jours : 78

Total : 5,612