Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Turn the device over so that the screen is facing down.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a hair dryer, slowly heat the edges of the WorkPad.
-
Spend at least one minute heating each side of the device. This will melt the glue holding the case together, and allow it to be removed.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a plastic opening tool to pry the back case from the WorkPad.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Turn the device over, so that the screen is laying on a flat surface.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
If the back case has already been removed, carefully place it on the WorkPad to protect the circuitry inside from the heat.
-
Using the hair dryer, slowly heat the edges of the device. Spend at least 1 minute on each side, thoroughly heating the case.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using the Plastic Opening Tools, take the front of the case off.
-
The power button at the top of the device will be loose once the front part of the case is removed.
-