Réparez vos affaires Communauté Boutique

Disassembling Kinivo ZX100 Mini Portable Speaker

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

Prerequisite only.

Ce dont vous avez besoin

  1. Disassembling Kinivo ZX100 Mini Portable Speaker, Disassembling Kinivo ZX100 Mini Portable Speaker: étape 1, image 1 de 1

    • Open the circular portion at the top of the speaker by twisting it until it reaches the maximum possible height.

    • Make sure it is twisted fully, as this will allow access to four screws to be removed in the next step.

    Modifier

  2. Disassembling Kinivo ZX100 Mini Portable Speaker: étape 2, image 1 de 2 Disassembling Kinivo ZX100 Mini Portable Speaker: étape 2, image 2 de 2

    • Remove the four 12 mm Phillips screws from the enclosure.

    Modifier

  4. Disassembling Kinivo ZX100 Mini Portable Speaker: étape 3, image 1 de 2 Disassembling Kinivo ZX100 Mini Portable Speaker: étape 3, image 2 de 2

    • Separate the resonator portion from the base of device to reveal the middle separator of the enclosure. The enclosure will now be in two pieces.

    • Hold the resonator portion of the enclosure gently aside to make sure there is no tension on the black and red wires coming from the bottom portion of the device.

    • Excessive force may disconnect the black and red speaker wires from the circuitry in the bottom portion of the device.

    Modifier

  5. Disassembling Kinivo ZX100 Mini Portable Speaker: étape 4, image 1 de 1

    • Separate the very bottom portion of the enclosure (marked in red) by pulling vertically on the red portion of the enclosure (marked in orange).

    • Gently set the very bottom portion and the resonator section aside once they have both been separated.

    • Remove the circuit board with your hands by lifting and sliding the board away from the LED indicator.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 9 autres contributeurs

Laura Dion

Membre depuis le 03/26/15

143 Réputation

1 tutoriel rédigé

Badges: 9

+ 6 badges supplémentaires

Équipe

UMass Dartmouth, Team 1-5, Shastany Spring 2015 Membre de l'équipe UMass Dartmouth, Team 1-5, Shastany Spring 2015

UMASSD-SHASTANY-S15S1G5

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 4

Total : 83