Aller au contenu principal

Disassembling Kodak Advantix F350 Front Cover

Ce dont vous avez besoin

  1. Disassembling Kodak Advantix F350 Front Cover, Back Cover: étape 1, image 1 de 1
    • Turn off the camera.

    • Locate the power switch on the front of the camera below the camera lens.

    • Slide the switch to the off position.

  2. Disassembling Kodak Advantix F350 Front Cover: étape 2, image 1 de 2 Disassembling Kodak Advantix F350 Front Cover: étape 2, image 2 de 2
    • Locate the 3 screws that hold the back cover to the camera.

    • One screw is located on the film opener side of the camera.

    • The other screws are located on the opposite side of the camera.

  3. Disassembling Kodak Advantix F350 Front Cover: étape 3, image 1 de 3 Disassembling Kodak Advantix F350 Front Cover: étape 3, image 2 de 3 Disassembling Kodak Advantix F350 Front Cover: étape 3, image 3 de 3
    • Use the Phillips #00 Precision Screwdriver and remove the screws on the back cover.

  4. Disassembling Kodak Advantix F350 Front Cover: étape 4, image 1 de 2 Disassembling Kodak Advantix F350 Front Cover: étape 4, image 2 de 2
    • Open the film door to remove the back cover.

    • Slide the film door lever to the left until the film door opens.

  5. Disassembling Kodak Advantix F350 Front Cover: étape 5, image 1 de 2 Disassembling Kodak Advantix F350 Front Cover: étape 5, image 2 de 2
    • Use a plastic opening tool to pry the case open until a small gap is present.

    • Repeat this process at the top and bottom of the film door to loosen it.

  6. Disassembling Kodak Advantix F350 Front Cover: étape 6, image 1 de 3 Disassembling Kodak Advantix F350 Front Cover: étape 6, image 2 de 3 Disassembling Kodak Advantix F350 Front Cover: étape 6, image 3 de 3
    • Grab the top and bottom of the case firmly as shown.

    • Gently remove the back of the camera case with a slight twisting motion.

  7. Disassembling Kodak Advantix F350 Front Cover, Front Cover: étape 7, image 1 de 2 Disassembling Kodak Advantix F350 Front Cover, Front Cover: étape 7, image 2 de 2
    • Locate the 3 screws on the camera that hold the front cover of the camera to the camera body.

    • The first 2 are located on the bottom of the camera.

    • The last screw is located behind the flash module.

    • Turn the camera on, and raise the flash module to locate the flash module screw.

  8. Disassembling Kodak Advantix F350 Front Cover: étape 8, image 1 de 2 Disassembling Kodak Advantix F350 Front Cover: étape 8, image 2 de 2
    • Remove the 2 screws at the base of the camera housing.

    • Use the Phillips #00 Precision Screwdriver and remove the screws.

    • Repeat this process for the screw behind the flash module.

  9. Disassembling Kodak Advantix F350 Front Cover: étape 9, image 1 de 2 Disassembling Kodak Advantix F350 Front Cover: étape 9, image 2 de 2
    • Remove the screw located under the flash module using the Phillips #00 Precision Screwdriver.

  10. Disassembling Kodak Advantix F350 Front Cover: étape 10, image 1 de 2 Disassembling Kodak Advantix F350 Front Cover: étape 10, image 2 de 2
    • Remove the flash cover.

    • Remove the flash module by twisting it up and outward of the camera housing.

    • The cover can now be be removed.

  11. Disassembling Kodak Advantix F350 Front Cover: étape 11, image 1 de 2 Disassembling Kodak Advantix F350 Front Cover: étape 11, image 2 de 2
    • Remove the film door lever.

    • Remove the screw holding the film lever in place by using a Phillips #00 Precision Screwdriver.

    • Using a plastic opening tool, gently pry the switch upwards to remove it.

  12. Disassembling Kodak Advantix F350 Front Cover: étape 12, image 1 de 1
    • Open the battery door by pushing the lever towards the arrow indicated.

  13. Disassembling Kodak Advantix F350 Front Cover: étape 13, image 1 de 3 Disassembling Kodak Advantix F350 Front Cover: étape 13, image 2 de 3 Disassembling Kodak Advantix F350 Front Cover: étape 13, image 3 de 3
    • Remove the front cover.

    • Insert your thumb in the film hole and gently pry the bottom loose.

    • Once the front is loose, gently pull it out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

David Cottrell

Membre depuis le 10/04/11

88 Réputation

5 tutoriels rédigés

Équipe

UW Stout, Team 1-2, Zhou Fall 2011 Membre de l'équipe UW Stout, Team 1-2, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G2

4 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 833