Aller au contenu principal

Disassembling Kodak Easyshare C813 Back Cover

Ce dont vous avez besoin

  1. Disassembling Kodak Easyshare C813 Back Cover, Battery: étape 1, image 1 de 1
    • Turn off camera by firmly pressing the power button that is located on the top of the camera near the selector dial.

  2. Disassembling Kodak Easyshare C813 Back Cover: étape 2, image 1 de 3 Disassembling Kodak Easyshare C813 Back Cover: étape 2, image 2 de 3 Disassembling Kodak Easyshare C813 Back Cover: étape 2, image 3 de 3
    • Press thumb firmly on battery door and slide it in the direction of the arrow.

    • Lift thumb allowing the door to swing open.

  3. Disassembling Kodak Easyshare C813 Back Cover, Back Cover: étape 3, image 1 de 1
    • Before removing back cover, it is advisable to use an anti-static wrist strap to prevent damage to electronics.

  4. Disassembling Kodak Easyshare C813 Back Cover: étape 4, image 1 de 1
    • Turn the camera off by firmly pressing the power button located on top of the camera.

  5. Disassembling Kodak Easyshare C813 Back Cover: étape 5, image 1 de 3 Disassembling Kodak Easyshare C813 Back Cover: étape 5, image 2 de 3 Disassembling Kodak Easyshare C813 Back Cover: étape 5, image 3 de 3
    • Locate the 7 screws holding the back cover on.

    • Three screws are located on the bottom of the camera.

    • Two screws are located on the side shown in the photograph.

    • Two final screws are located on the opposite side shown in the photograph.

  6. Disassembling Kodak Easyshare C813 Back Cover: étape 6, image 1 de 3 Disassembling Kodak Easyshare C813 Back Cover: étape 6, image 2 de 3 Disassembling Kodak Easyshare C813 Back Cover: étape 6, image 3 de 3
    Outil utilisé dans cette étape :
    Phillips #00 Screwdriver
    $5.49
    J'achète
    • Remove all 7 screws:

    • Hold the camera firmly with one hand so that you can still see a screw.

    • Place the Philips 00(Found here)screwdriver into the screw.

    • Turn the screwdriver to the left until it is free.

    • Repeat for the remaining screws.

  7. Disassembling Kodak Easyshare C813 Back Cover: étape 7, image 1 de 3 Disassembling Kodak Easyshare C813 Back Cover: étape 7, image 2 de 3 Disassembling Kodak Easyshare C813 Back Cover: étape 7, image 3 de 3
    • Use plastic opening tools to slightly open the side of the case.

    • Insert a plastic opening tool and apply pressure to the internal three tabs at the top.

    • The first two are near the words "3X Optical Zoom".

    • The third is near the shutter button.

  8. Disassembling Kodak Easyshare C813 Back Cover: étape 8, image 1 de 3 Disassembling Kodak Easyshare C813 Back Cover: étape 8, image 2 de 3 Disassembling Kodak Easyshare C813 Back Cover: étape 8, image 3 de 3
    • Gently pull apart the back cover from the rest of the camera.

    • Make sure there are no more screws or tabs keeping the cover on.

    • Use the plastic opening tool to separate any sides still closely connected.

Ligne d'arrivée

Une autre personne a terminé cette réparation.

Susan Marano

Membre depuis le 04/15/10

336 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 24-22, Regan Spring 2010 Membre de l'équipe Cal Poly, Team 24-22, Regan Spring 2010

CPSU-REGAN-S10S24G22

4 membres

20 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 2,362