Introduction

The Macintosh IIsi came with a red-ribbon 1.44MB "SuperDrive" (and yes, just like DVD-Burning "SuperDrives" this was the best available option)

Pièces

Aucune pièce nécessaire.

Start by turning the computer around, and remove this #0 Phillips Screw.
  • Start by turning the computer around, and remove this #0 Phillips Screw.

  • There may or may not be a Phillips #0 screw here, depending on whether or not the computer has ever been serviced.

Ajouter un commentaire

Now lift these two clips, and slowly pivot the case up.
  • Now lift these two clips, and slowly pivot the case up.

  • You can now seperate the top of the computer from the rest of the machine.

Ajouter un commentaire

  • The "SuperDrive" is mounted similarly to the hard drive, and positioned right next to it.

  • Push these two tabs out, and lift the drive up.

Ajouter un commentaire

  • Flip the drive so it is on top of the power supply, and remove the "Red-Ribbon" cable.

  • 1.44MB floppy drives need a ribbon cable with a red stripe on one side. 400KB floppy drives use a ribbon cable with a yellow stripe on one side. 800KB floppy drives can use a red, or yellow striped cable.

  • This drive was manufactured by Sony in 1990.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Chris Green

Membre depuis le 11/10/2009

32 161 Réputation

47 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

277 membres

730 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 4

Total : 2,427