Introduction

The Macintosh IIsi has a case fan mouted on inside back of the computer case.

  1. The fan recieves power from two contacts on the logic board and has no connector.
    • The fan recieves power from two contacts on the logic board and has no connector.

    Ajouter un commentaire

  2. In all of the years that I have worked on this machine, I have found no good way to remove the fan.
    • In all of the years that I have worked on this machine, I have found no good way to remove the fan.

    • The best way to start, is to push in here on the side of the fan.

    • Being careful not to exert too much force, try to push in, and wiggle the fan outward as such. (2nd Photo)

    • You can now lift the fan all the way out, and remove it.

    • The Fan Power Contacts on the Logic Board:

    There is no need to pull out the fan. Just take a knife and you can squeeze the tab in step 7

    Willy Kaiser - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Chris Green

Membre depuis le 11/10/2009

32 499 Réputation

45 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

278 membres

755 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 1,568